A Divider is a hand marking tool used for measuring distances, transferring measurements, and scribing arcs or circles on a workpiece. It consists of two pointed legs joined at a pivot, allowing adjustment to the required distance. Dividers are widely used in fitting, layout, and workshop marking operations.

A Prick Punch is a hand marking tool used to make small, fine indentations on metal surfaces for accurate layout work. It has a sharp pointed tip with a smaller angle (usually around 30°) compared to a center punch, allowing precise marking of layout lines and reference points. This tool is commonly used in fitting and metalworking.

A Dot Punch is a hand tool used for marking small indentations on metal surfaces, typically to locate layout points or guide further machining operations. It has a sharper point compared to a center punch, allowing finer and more precise marking. This tool is widely used in fitting and metalworking for layout work.

A Plumb Bob is a simple measuring instrument used to establish a true vertical reference line. It consists of a pointed weight suspended from a string, which aligns with gravity to indicate vertical direction. This tool is widely used in construction, masonry, and surveying work

A Straight Edge is a precision measuring instrument used to check the straightness and flatness of surfaces. It is a simple tool with a perfectly straight edge that serves as a reference for inspection and layout work. This tool is widely used in fitting, machining, and quality control applications.

A Dial Indicator is a precision measuring instrument used to measure small linear distances and deviations with high accuracy. It converts small mechanical movements into readable values on a dial face. This tool is widely used in fitting, machining, and quality control to check alignment, run-out, and surface variations.

A Dial Indicator is a precision measuring instrument used to measure small linear distances and deviations with high accuracy. It converts small mechanical movements into readable values on a dial face. This tool is widely used in fitting, machining, and quality control to check alignment, run-out, and surface variations.

A Feeler Gauge is a precision measuring instrument used to measure small gaps, clearances, or spaces between two surfaces. It consists of a set of thin metal blades of different thicknesses, each marked with its size. This tool is widely used in fitting, automotive, and mechanical maintenance work.

A Combination Square is a precision measuring instrument used for checking and marking right angles (90°), 45° angles, and for measuring lengths and depths. It consists of a steel rule and a movable head that can be adjusted and locked at different positions. This tool is widely used in fitting, machining, and carpentry for accurate layout and inspection work.

A Side Cutting Plier, also known as a diagonal cutter, is a hand tool used for cutting wires and small metal components. It has sharp cutting edges positioned at an angle, allowing precise cutting close to surfaces. This tool is widely used by electricians for cutting electrical wires and cables.